

Avcrete Hsrm High Strength Concrete Repair Mortar
SVTAGL59S435
₹2,365+₹426 GST
7%
₹2,791(Incl all taxes)
MRP ₹3,000
Sold ByAVCON TECHNICS PRI..
0.0★
About the Product
| Brand | Generic ( Made in India ) |
| Quantity | 25 kg |
| High early strength Reaches ≥ 25 MPa in just 24 hours, enabling rapid return to service on critical infrastructure. | |
| Shrinkage-compensated Built-in expansion mechanism prevents plastic shrinkage cracks and micro-delamination at bond lines. | |
AVCRETE HSRM is a factory-blended, one-component, cementitious repair mortar formulated with graded aggregates, Portland cement, and polymer modifiers. The pre-blended system delivers consistent, predictable performance on every job — simply add water at the site. Shrinkage-compensated chemistry prevents cracking at the repair interface, ensuring long-term structural integrity without additional bonding agents on properly prepared substrates. Designed for repairs from 5 mm spot patches to 50 mm full-depth overlays, AVCRETE HSRM bonds to existing concrete, masonry, and steel-reinforced substrates. High early strength (≥ 25 MPa at 24 hours) means structures can return to service within one day, minimising costly downtime on bridges, parking decks, industrial floors, and civil infrastructure. Typical applications Where AVCRETE HSRM delivers results Bridge decks & beams Parking structures Industrial floors Columns & piers Highways & runways Building facades Retaining walls Precast elements How many bags of AVCRETE HSRM do I need for my repair? Coverage depends on repair depth and area. As a guide, one 25 kg bag yields approximately 12.5 litres of mixed mortar. For a 10 mm overlay over 1 m², you need roughly 2 bags. Use the request-a-quote button above for a project-specific estimate. Does AVCRETE HSRM need a bonding primer? On properly prepared, saturated surface dry (SSD) substrates, no separate bonding agent is required. For very smooth or contaminated surfaces, consult the technical datasheet or contact our team. What is the minimum temperature for application? Do not apply below +5°C. In hot weather above +35°C, use cooled water and shade the substrate to maintain workability within the 20–30 minute pot life. When can traffic be reinstated after repair? Light foot traffic is typically possible after 4–6 hours at 20°C. Vehicular traffic can usually be reinstated after 24 hours once ≥ 25 MPa is confirmed. Always verify with site conditions. Is AVCRETE HSRM suitable for overhead repairs? Yes. The thixotropic, non-sag formulation allows vertical and overhead application up to 50 mm per pass without formwork for most repairs. Consult a technical advisor for deeper sections. Technical specifications Packaging 25 kg moisture-resistant bag Shelf life 12 months (stored dry, off ground) Mixing water (approx.) 3.5–4.0 litres per 25 kg bag Pot life @ 20°C 20–30 minutes Min. application thickness 5 mm Max. application thickness 50 mm (single course) Substrate temperature +5°C to +35°C Compressive strength (1 day) ≥ 25 MPa Compressive strength (28 days) ≥ 50 MPa Flexural tensile strength (28 days) ≥ 2.0 MPa Bond strength (pull-off) ≥ 1.5 MPa Chloride ion content < 0.05% by cement weight Classification Structural repair mortar class R4 (EN 1504-3) Based on the product datasheet, here are the mixing and application steps: Surface Preparation Remove all loose, contaminated, or carbonated concrete by mechanical means (grinding, scabbling, or sandblasting) Expose sound concrete with a minimum surface profile Clean the substrate free of dust, oil, grease, and standing water Pre-wet the substrate to a Saturated Surface Dry (SSD) condition — damp but no free water Mixing Pour approximately 3.5–4.0 litres of clean, cool water into a clean mixing vessel Slowly add the full 25 kg bag while mixing continuously Mix with a slow-speed drill and paddle mixer (300–400 rpm) for 3–5 minutes until a uniform, lump-free consistency is achieved Do not add excess water — it reduces strength and bond Application Apply the mixed mortar to the prepared substrate within 20–30 minutes (pot life at 20°C) For trowel application, press firmly into the repair area to ensure full contact For formed pours, fill and consolidate in one continuous pour up to 50 mm depth Finish the surface with a steel or wooden float as required Curing Protect from direct sun, wind, and rain immediately after application Cure with wet hessian, curing membrane, or polythene sheeting for a minimum of 24 hours Do not allow the repair to dry out prematurely — poor curing is the most common cause of surface cracking Return to Service Foot traffic: 4–6 hours at 20°C Vehicular traffic: 24 hours at 20°C
pack of
1
Model Name
AVCRETE HSRM High Strength Concrete Repair Mortar
Height
14 cm
Length
46 cm
Width
47 cm
Weight
26 kg
Country Of Origin
India
Manufacturer Details
Avcon Technics pvt ltd
| Brand | Generic ( Made in India ) |
| Quantity | 25 kg |
| High early strength Reaches ≥ 25 MPa in just 24 hours, enabling rapid return to service on critical infrastructure. | |
| Shrinkage-compensated Built-in expansion mechanism prevents plastic shrinkage cracks and micro-delamination at bond lines. | |
AVCRETE HSRM is a factory-blended, one-component, cementitious repair mortar formulated with graded aggregates, Portland cement, and polymer modifiers. The pre-blended system delivers consistent, predictable performance on every job — simply add water at the site. Shrinkage-compensated chemistry prevents cracking at the repair interface, ensuring long-term structural integrity without additional bonding agents on properly prepared substrates. Designed for repairs from 5 mm spot patches to 50 mm full-depth overlays, AVCRETE HSRM bonds to existing concrete, masonry, and steel-reinforced substrates. High early strength (≥ 25 MPa at 24 hours) means structures can return to service within one day, minimising costly downtime on bridges, parking decks, industrial floors, and civil infrastructure. Typical applications Where AVCRETE HSRM delivers results Bridge decks & beams Parking structures Industrial floors Columns & piers Highways & runways Building facades Retaining walls Precast elements How many bags of AVCRETE HSRM do I need for my repair? Coverage depends on repair depth and area. As a guide, one 25 kg bag yields approximately 12.5 litres of mixed mortar. For a 10 mm overlay over 1 m², you need roughly 2 bags. Use the request-a-quote button above for a project-specific estimate. Does AVCRETE HSRM need a bonding primer? On properly prepared, saturated surface dry (SSD) substrates, no separate bonding agent is required. For very smooth or contaminated surfaces, consult the technical datasheet or contact our team. What is the minimum temperature for application? Do not apply below +5°C. In hot weather above +35°C, use cooled water and shade the substrate to maintain workability within the 20–30 minute pot life. When can traffic be reinstated after repair? Light foot traffic is typically possible after 4–6 hours at 20°C. Vehicular traffic can usually be reinstated after 24 hours once ≥ 25 MPa is confirmed. Always verify with site conditions. Is AVCRETE HSRM suitable for overhead repairs? Yes. The thixotropic, non-sag formulation allows vertical and overhead application up to 50 mm per pass without formwork for most repairs. Consult a technical advisor for deeper sections. Technical specifications Packaging 25 kg moisture-resistant bag Shelf life 12 months (stored dry, off ground) Mixing water (approx.) 3.5–4.0 litres per 25 kg bag Pot life @ 20°C 20–30 minutes Min. application thickness 5 mm Max. application thickness 50 mm (single course) Substrate temperature +5°C to +35°C Compressive strength (1 day) ≥ 25 MPa Compressive strength (28 days) ≥ 50 MPa Flexural tensile strength (28 days) ≥ 2.0 MPa Bond strength (pull-off) ≥ 1.5 MPa Chloride ion content < 0.05% by cement weight Classification Structural repair mortar class R4 (EN 1504-3) Based on the product datasheet, here are the mixing and application steps: Surface Preparation Remove all loose, contaminated, or carbonated concrete by mechanical means (grinding, scabbling, or sandblasting) Expose sound concrete with a minimum surface profile Clean the substrate free of dust, oil, grease, and standing water Pre-wet the substrate to a Saturated Surface Dry (SSD) condition — damp but no free water Mixing Pour approximately 3.5–4.0 litres of clean, cool water into a clean mixing vessel Slowly add the full 25 kg bag while mixing continuously Mix with a slow-speed drill and paddle mixer (300–400 rpm) for 3–5 minutes until a uniform, lump-free consistency is achieved Do not add excess water — it reduces strength and bond Application Apply the mixed mortar to the prepared substrate within 20–30 minutes (pot life at 20°C) For trowel application, press firmly into the repair area to ensure full contact For formed pours, fill and consolidate in one continuous pour up to 50 mm depth Finish the surface with a steel or wooden float as required Curing Protect from direct sun, wind, and rain immediately after application Cure with wet hessian, curing membrane, or polythene sheeting for a minimum of 24 hours Do not allow the repair to dry out prematurely — poor curing is the most common cause of surface cracking Return to Service Foot traffic: 4–6 hours at 20°C Vehicular traffic: 24 hours at 20°C
SpareVillage is a B2B industrial spare parts marketplace designed to simplify procurement for businesses. We connect buyers with verified suppliers for MRO (Maintenance, Repair & Operations) products, industrial components, and spare parts, ensuring quality, competitive pricing, and faster sourcing.
SpareVillage offers a centralized procurement platform for industrial spares, eliminating the need to deal with multiple vendors. With verified suppliers, transparent pricing, and reliable fulfillment, businesses can streamline their industrial sourcing and supply chain operations.
You can find a wide range of industrial spare parts, MRO products, machinery components, tools, and equipment across categories. SpareVillage is built to support factories, manufacturers, and maintenance teams with all their procurement needs in one place.
We onboard and work with trusted and verified industrial suppliers to ensure consistent quality. SpareVillage focuses on reliable sourcing, standardized listings, and supplier validation, helping businesses reduce procurement risks.
Yes, SpareVillage is designed for bulk procurement and B2B industrial requirements. Businesses can place large orders or reach out for custom sourcing of industrial spare parts and MRO supplies, making it ideal for ongoing operational needs.
By acting as a single platform for industrial procurement, SpareVillage reduces sourcing time, improves vendor coordination, and enhances supply chain visibility. This helps businesses optimize costs, reduce downtime, and improve operational efficiency.











![Music555 PVC Electrical Insulation Tape 15mm [30 Piece]](/_next/image?url=https%3A%2F%2Fsparevillage.s3.ap-south-1.amazonaws.com%2Fimages%2F1781168140823-o2.webp&w=3840&q=75)









